Compressors that can be used to pump clean water

December 25, 2020

Compressors in this category are designed for clean water, so they have special filters with fine mesh. Otherwise, their design is not much different from the previously discussed models.

Grundfos Unilift CC 5 A1

This brand of water pump is used to pump clean and slightly polluted water. Its body is made of impact-resistant plastic, and the shaft and impeller are made of stainless steel.

The device is equipped with a built-in check valve and ¾, 1 and 1¼ adapters. A convenient handle is provided, and the warranty period is 2 years.

Main features:

Power consumption - 250 W;
Water pressure - 5.2 m;
Maximum flow rate - 6m³/hour;
Dimensions - 16x16x30.5 cm;
Weight - 4.6 kg.

Pros:

Small size;
Reliable construction;
Overheating protection;
Low noise level;
Universal adapter;
Pours water down to zero level.

Cons:

High price.

AL-KO Dive 5500/3

The pump is designed for pumping clean or slightly polluted water, the body of which is made of plastic. The compressor is equipped with a powerful triple motor that can operate at three speeds. The cable length is 10 meters, and the submergence sensor allows the device to operate in automatic mode.

Main features:

Power consumption - 800 W;
Water pressure - 30 m;
Maximum flow rate - 5.5 m³/hour;
Dimensions - 17.9x17.9x39.1 cm;
Weight - 7.5 kg.

Pros:

Reliable construction;
Small size;
High head;
Acceptable price.

Cons:

The high price example has low performance.

BELAMOS Omega 55 F

The body and ring of this water pump are made of high-quality plastic, and the shaft is made of stainless steel. There is a mechanism for protecting against overheating. The built-in submergence sensor allows you to work in manual and automatic mode. The permissible size of particles in the water is 16 mm.

The maximum immersion depth is 7 meters, and the cable length is 10 meters.

Main features:

Power consumption - 550 W;
Water pressure - 7 m;
Maximum flow rate - 10 m³/hour;
Dimensions - 34x38x46 cm;
Weight - 4.75 kg.

Pros:

High level of performance;
Minimal maintenance;
Reliable construction;
Low noise level;
Affordable price.

Cons:

The immersion height is not adjustable.

JILEX 200/25

The unit is designed for immersion at a depth of 8 meters, with a cable length of 10 meters. The housing is made of plastic, and the screw connections are 1¼ and 1½ inches. The motor has a built-in thermal overload protector.

Main features: