Advantages and disadvantages of Wagner and Bosch technical layer models

December 23, 2020

If you want to remove adhesive materials from a surface, you can easily do the job with a technical layer, without unnecessary effort or tools.

In addition to adhesive, the technical layer can be used with materials such as: plaster, old paints, plastic, copper, etc. During operation, the device emits hot air, which melts all of the above materials, after which the removal process no longer requires much effort.

Wagner Furno 500

A construction hair dryer with a power of 2000 W, which has rubber grips on both sides of the handle, and the temperature can be controlled from 60 to 600 degrees. It is controlled with four buttons and all the specified parameters are displayed on the screen.

Pros:

The kit includes a narrow nozzle for treating various areas with hot air;
The part of the body around the heating element is provided with additional insulation material so that your hand does not get hot;
All buttons are rubber, so they are safe to touch with wet hands;
There is a convenient hook at the end of the handle for hanging;
Good construction without unnecessary flaws;
There is a cooling mode;
Six temperature modes and accurate maintenance of set values.

Cons:

If you have to hold a 900g technical layer in your hand for a long time, your hand may get tired;
The device comes in a cardboard box, so you will need to purchase a separate suitcase for field work;
The set includes only two attachments, which is not enough for all types of work;
Extra care must be taken when using it to avoid breaking the sensitive screen, otherwise it will be impossible to adjust the settings.

Bosch GHG 660 LCD

A decent European-made Bosch hair dryer with 2300 W power and temperature control (from 50 to 660 degrees). It is distinguished by a rich set, which includes 5 attachments and a durable body.

Pros:

The compact 250 mm head length is convenient for hard-to-reach areas;
The ability to adjust the temperature to one degree allows you to accurately determine the heat reduction of materials;
Four memory settings options store the specified modes and facilitate quick access to them when turned on;

Ten levels of airflow adjustment;
Automatic shutdown during overheating.
The technical layer handle is double insulated;
A removable filter is installed inside to protect the engine from dust.

Cons:

Some users note that after four years of operation, the connection block burned out, and repairs are very expensive;
1 kg of weight is very tiring for the hand;
To ensure it serves you for a long time, it needs to be cooled down every 15 minutes of operation;
Bosch hair dryers are much more expensive than similar models from other brands;
If dropped, the screen will break immediately.

Popular models