How to work with a perforator correctly?

June 26, 2020

Even a small repair, not to mention professional construction, would not be complete without the use of a perforator . With its help, you can make a hole in a stone wall or concrete structure.

Also, perforators allow you to quickly and easily process the required number of holes in ceramic tiles, bricks, wood and On metal. Additional nozzles will allow you to drill and expand the material.

Depending on the features of the tool and the availability of additional components, the perforator can be used to perform various construction operations .

When you start working with a hammer drill on different materials, you should keep in mind that they all differ in structure. For example, if wood is relatively easy to work with, metal may be more difficult to work with.

As for the ceramic material specifically, the main problem with working with ceramics is that it can completely break if you approach it incorrectly. That is why when using a perforator, it is necessary, first of all, to turn off the shock mode and start drilling from low revolutions with a gradual increase in speed.

If you use a special drill, the tool can create holes in almost any material. In most cases, they have a cylindrical shield and a spiral design, and the material of their manufacture is high-strength steel.

Let's also consider the power of the perforator, which you should definitely pay attention to when buying:

Power - Electrical power is the main characteristic in determining the capabilities of the tool. The power of most perforators is in the range of 450-2000 watts, which can be divided into the following classes:

Up to 900 watts - used for household needs. As a rule, a device of this power is suitable for home use;
From 900 to 1500 watts - these are professional models;
From 1500 watts and above - used for particularly heavy work.

Perforator type:
The type is characterized by the positioning of the motor. It can be used in two ways: horizontal and vertical.

Vertical perforators have a perpendicular engine layout. Their appearance, when inverted, resembles the Latin letter L. The main advantage is in cooling and engine power. As a rule, vertical perforators are the most powerful.
Horizontal perforators have a horizontal engine placement. They are relatively convenient to use in confined spaces because they are lighter and longer.

When preparing for any construction work, it is necessary to pay special attention and try to observe safety measures. The case of perforators is no exception. Preliminary preparation is required in cases where it is assumed that during operation it may be necessary to change the nozzles.

( The Bosch perforator selection shown in the picture is in our corresponding collection )

What additional operations can be performed when using a perforator?

Removing and cleaning the cartridge;
Lubricating its internal parts;
Installing the cartridge with a modified lubricating ring;
Redesigning the cartridge for its more reliable fixation.

All work instructions and safety precautions can only be followed when the perforator is disconnected from the mains. Finally, be sure to note that it is advisable to start working in slow mode before using the tool.

You can also find information about the different working modes of the perforator on our page .

Popular models