Frezi - Selection criteria and model discussion

Household and professional routers differ not only in cost and size, but also in performance indicators.

If you are going to buy a router , you should determine the range of tasks you want to solve or are thinking about . For example, a lightweight and compact model will not cope with woodworking, but is ideal for simple household use.

The performance of a milling machine is determined by the power of its engine:

  • The most versatile are devices that meet the 750 to 1500 W rating. For working with soft wood , a router with a power of no more than 700 W is sufficient.
  • Professional craftsmen mainly use large models equipped with motors of 2000 W or more, but keep in mind that this figure is excessive for home use.
  • The accuracy of surface treatment is affected by the rotational speed of the device. For household work, it is recommended to purchase a tool with a speed of 7000 rpm, which does not make much noise and is relatively inexpensive.

AEG BOF18BL-0

The cordless router allows you to work even when there is no power supply. The 18 V battery can handle even heavy loads.

Thanks to the use of permanent magnets in the motor design, energy is saved, which increases the productivity of the milling machine and saves battery life.

Frezi - Selection criteria and model discussion

The rotation speed reaches 25,000 per minute, and the working depth is quickly adjusted using the locking lever.

Advantages:

  • High level of performance;
  • Autonomous work;
  • Small sizes;
  • 7 different levels of speed control;
  • Workplace lighting.

Disadvantages:

  • Battery sold separately.

Hammer FRZ710 Premium

The device operates with a wide range of adjustable speeds, with a rotation rate of 10,000 to 30,000. The motor power is 710 watts.

Frezi - Selection criteria and model discussion

Advantages:

  • Speed ​​regulation;
  • Ability to quickly replace equipment/disk;
  • High level of performance;
  • Possibility of connecting a vacuum cleaner.

Disadvantages:

  • Lack of ventilation system.

Makita PJ7000

The model is equipped with a six-step cutting regulator, which allows you to change the depth of material processing from 0 to 20 millimeters. The device is quite compact in size and is very easy to transport.

Frezi - Selection criteria and model discussion

The motor power of the Makita wood router is 710 W, and the maximum rotation speed is 11,000 rpm.

Advantages:

  • Light weight;
  • Ability to quickly change the disk;
  • Dust removal system;
  • Double insulation;
  • Convenient adjustment.

Disadvantages:

  • Thin, easily frayed power cord.

Popular models

ფრეზი Bosch GOF 130
Router Bosch GOF 130
429.00 ლარი / თვეში 24 ლარი
უფასო მიწოდება
warranty კომერციული გარანტია 1 წელი
ფრეზი Bosch GKF 550
Router Bosch GKF 550
289.00 ლარი / თვეში 16 ლარი 299.00 ლარი
უფასო მიწოდება
warranty კომერციული გარანტია 1 წელი
ფრეზი 500W DINGQI JJ02403
Milling cutter 500W DINGQI JJ02403
174.00 ლარი / თვეში 10 ლარი
უფასო მიწოდება
warranty კომერციული გარანტია 1 წელი
ფრეზი 1200W DINGQI 10090401
Milling cutter 1200W DINGQI 10090401
199.00 ლარი / თვეში 11 ლარი
უფასო მიწოდება
warranty კომერციული გარანტია 1 წელი

შესაძლოა დაგაინტერესოთ

უკან დაბრუნება